I receive you loud and clear!
Here is the next stage of the receiver transmitter for the dreaming focusing device. The cover is on the left, the body is on the right. You can see the vertical openings where the focused dream comes in. And the little holes in the center divider will allow the selected dream type into the transmitter side.
I have to clean these pieces up and dip them in hot beeswax. Next I will draw designs on the parts and etch them in ferric chloride. I am waiting for a clear day to do that. In the meantime I need to make the dial for the top, which will allow the user to chose the type of dream. I am thinking the selection should be: fish, bird, bear, star and moon. I would like to have any and all of those dreams.
What you can't see here is that I am having to learn to solder (high temperature brazing, using an acetylene torch), on a different scale. This 2.5 inch long box is much harder to solder than the little things I'm used to. In fact last week I described it as "4 inches long." It feels huge to me. I spent ages with the torch trying to get the body hot enough. Finally, when it was done, the seam looked pretty good. I thought the cover would be much easier. Unfortunately it took me three tries to get the whole cover seam soldered. But I am learning. I got the center divider right on the first try.
Labels: Work in Progress
0 Comments:
Post a Comment
Links to this post:
Create a Link
<< Home